Gain a significant sound improvement over factory PSE under all driving conditions with the SOUL Valved Exhaust. A large diameter X-pipe in the primary flow path allows for a refined amount of aggression while a bespoke X-pipe muffler induces a smooth exhaust note as the valves close.
+ All Soul Performance Products exhaust components are backed by the industry’s first and finest Lifetime Warranty for both street and track use
+ Designed and built in-house at our Willow Grove, PA facility
Description
DEVELOPMENT: Our aim was to increase the volume of the rear exhaust while maintaining a refined tone and level of volume – even with upgraded catalytic converter sections. The factory valves are electronically controlled unlike older “open or closed” vacuum style valves. Able to work variably, the valves will gradually open and close depending on several factors of engine operation. Even under full throttle application in Sport mode the valves will still not stay open 100% of the time. With this in mind it was imperative that our system have a smooth transition during valve operation.
To tame drone we made use of our bespoke X-pipe muffler. Internally this muffler is quite unique. It has little to no restriction in the flow path, using straight through piping that is perforated to allow exhaust gasses to escape and become muffled in the surrounding packing material of the muffler body. We incorporated an internal X-pipe to allow the exhaust flow to merge smoothly. These characteristics combined were crucial towards reducing and smoothing out the drone in the 2,000-2,400rpm range while enhancing that higher pitched note we were after in both the valves closed and open conditions. With valves open exhaust gases are free to flow through 3″ piping with an x-pipe to enhance the tone before exiting out the tips. Exhaust gasses still have a secondary flow path to “talk” with the muffler, encouraging a fuller, more robust tone.
CONSTRUCTION: Each system is assembled in house in the USA out of mandrel bent, thick wall .065″” T304L stainless steel. Back purged TIG welding (with ARCAL™ Prime argon gas) ensures proper weld penetration and longevity. Water jet cut flanges are made to ISO 9001:2015 standards with tolerances of +/- 0.003 inches for extreme precision. We fabricate this exhaust using thick gauge aluminum fixtures which act as a great heat sink during the welding process and prevent warping not only of our products, but the fixtures themselves to ensure perfect fitment.
BOLT ON AND GO: Every component is rigorously quality-checked, tested in a fixture to guarantee fitment, and then foam packed to ensure they arrive in perfect condition. New high grade hardware and valve adapters are included for installation.
LIFETIME WARRANTY: Enjoy your SOUL exhaust components for your Porsche with confidence on both the street and track as they are covered by our Lifetime Warranty! Our team will quickly work with you to resolve any issues or answer any questions that you may have.
Porsche 992 Carrera Valved Exhaust System
SOUL Performance Products provides the original owner with a LIFETIME WARRANTY for all products we manufacture, covering materials and workmanship for both street and track use. We strive to source and build the best products while providing elite workmanship, and our warranty reflects that.
SOUL FITMENT GUARANTEE
We build our products to the highest standard and make every effort to deliver a flawless product to you. Should any complications arise, our no-hassle fitment guarantee assures that any obstacles with installation will be addressed and resolved as quickly as possible. The overwhelming majority of claims we resolve are related to an issue with the installation process, condition of the vehicle, or other aftermarket modifications. SOUL will assess your unique situation and quickly work to determine the cause and expedite a solution.
- You must contact SOUL BEFORE modifying / removing components to allow us to address and accurately diagnose the situation as-is
- Fitment complications must be caused by SOUL product(s) and SOUL product(s) alone
- SOUL will promptly send out a replacement exhaust component OR issue an immediate refund once product is returned and inspected
For expedited assistance:
Call (855) 486-1400
Email sam@soulpp.com
CATALYTIC CONVERTERS have a three (3) year warranty and are covered except when used with leaded race fuel or any type of fuel additive. Such non-manufacturer specified fuels will damage any catalytic converter and warranty is voided when these fuels and additives are used. Damage clearly evident from “burble” tunes not sold by SOUL Performance Products OR from track use are subject to discretion for coverage.
- SOUL Performance Products will repair or replace the catalytic converters once (1) during the 3 year period, or give the option to exchange for a catless equivalent product if available.
Sound is not covered under any warranty. We will do our best to meet expectations but sound is subjective. There are ways to adjust sound level and we will work with you to find the right one for you.
SOUL Performance LLC under this warranty, in any event, will not be liable for loss of use, inconvenience, consequential or resultative damage. Our sole obligation under this warranty shall be limited to repair or replacement of our product.
Secondhand Components: Product warranty applies to the original purchaser on record, for the original vehicle on which the product was installed. Secondhand owners can have any possible parts repaired at cost or have the option of a reduced-cost replacement of the same or similar product (requires sending in original component).
COATINGS
- Coatings on exhaust tips are covered for one year from defects. Physical damage or any damage incurred from customer negligence voids any warranty claims.
- Jet-Hot ceramic coatings are covered for life under Jet-Hot’s Lifetime Warranty.
THIRD PARTY PRODUCTS
All products we retail from other sources shall a.) have the warranty provided by the manufacturer or distributor and b.) follow their return policy.
RETURNS
Should you wish to return your order, PLEASE CONTACT AutoAmateur so we can expedite the process and prevent confusion. Contact us to receive an RMA number, which needs to be marked clearly on the package so that we can process your return.
contact@autoamateur.com
NEW IN BOX: If for any reason you change your mind regarding your SOUL purchase, components that are new in box can be shipped back to us at the buyer’s expense within 30 days of original shipment, and a restocking fee may apply. For customers opting to receive a refund in the form of store credit, additional fees will be waived.
- Components that have been customized, such as tips with custom logos, will be subject to additional restocking fees in order to refinish them for resale.
OPEN BOX: If we are unable to resell the item as new, up to a 50% fee will be applied depending on the labor / parts necessary to sell the item as new OR to cover loss as selling as used – the details of which will be explained in full for clarification. An example of this is installation marks, dings, dents, scratches, and any modifications made. Sending photos is always recommended to prevent surprises.
PURCHASES FROM SOUL DEALERS: SOUL does not accept returns or provide refunds direct to the end customer of dealers, you must contact the business you purchased the product from and proceed through their return policy.
Refunds are typically processed the same business day after inspection and communication with customer. For special circumstances, please contact us.
Unless stated otherwise all exhaust components and Soul products are designed, manufactured and fulfilled in USA.